News Centre

RESOURCES

Send your inquiry

Polyurethane (PU) Sheet & Rod: Properties and Applications - cover image

Polyurethane (PU) Sheet & Rod: Properties and Applications

Cast polyurethane sits between rubber and rigid plastics, and that is precisely its value: it absorbs impact like rubber, machines like plastic, and outwears both in abrasive sliding duty. PU rollers, pads, scrapers, and seals appear throughout mining, packaging, and food processing. NAGOMER machines cast PU components in hardnesses from soft elastomer to semi-rigid sheet.

Plastics for Metal Finishing & Electroplating: Racks, Barrels & Tank Linings - cover image

Plastics for Metal Finishing & Electroplating: Racks, Barrels & Tank Linings

Electroplating shops attack equipment from every direction: sulphuric and chromic acid baths, hot alkaline cleaners, live current, and constant handling. Metals corrode on contact — which is why plastics do most of the work in a modern plating line, from tank construction to rack coatings to barrel bodies.

Plastics for Oil-Free Compressors: Valves, Piston Rings & Seals - cover image

Plastics for Oil-Free Compressors: Valves, Piston Rings & Seals

Oil-free compressors remove lubricant from the compressed gas — essential for food, medical, and laboratory air — and in doing so they remove the lubricant from every sliding interface inside the machine. Polymer valve plates, piston rings, and seals are what make that possible, running dry at elevated temperature for millions of cycles.

Plastics for Laboratory & Analytical Instruments - cover image

Plastics for Laboratory & Analytical Instruments

Analytical instruments live or die by what they add to the sample. A metal surface in an HPLC flow path adds ions and adsorbs analytes; a poor seal adds air; a contaminated vial cap ruins a chromatogram. Engineering plastics — PEEK above all — have become the default material for wetted flow paths precisely because they add nothing.

Plastics for EV Charging Infrastructure: Connectors, Housings & Cables - cover image

Plastics for EV Charging Infrastructure: Connectors, Housings & Cables

EV charging hardware combines three hostile requirements in one product: high voltage, outdoor weather exposure, and thousands of plug-in cycles. Every connector, housing, and cable jacket is a material decision that determines whether the charger survives a decade of public use. This guide covers the materials that meet the duty — and the ones that quietly fail.

Plastics for Hydrogen Energy: Valves, Seals & Storage Components - cover image

Plastics for Hydrogen Energy: Valves, Seals & Storage Components

Hydrogen is the most demanding fluid the energy transition has to offer: the smallest molecule in existence, stored at 350 or 700 bar, sometimes at −253°C as a liquid, and aggressively permeating wherever it can. Metals embrittle, seals relax, and every component in the chain is scrutinised. Engineering plastics — PEEK, PTFE, PA12, and PPS — carry much of the load.

High-Performance Plastics Master Guide: PEEK vs PI vs PAI vs PEI vs PPS - cover image

High-Performance Plastics Master Guide: PEEK vs PI vs PAI vs PEI vs PPS

Five polymers dominate the high-performance tier of engineering plastics: PEEK, PI, PAI, PEI, and PPS. Each has a clear territory, and the wrong choice costs either performance or money. This master guide compares them side by side and gives a practical selection route — the summary version of the individual guides published across this series.

Plastics for Medical Imaging: MRI, CT & X-Ray Equipment - cover image

Plastics for Medical Imaging: MRI, CT & X-Ray Equipment

Medical imaging equipment is unforgiving of materials. MRI forbids anything magnetic; X-ray and CT demand that structures stay out of the image; and every patient-contact surface must survive harsh disinfectants for years. Engineering plastics meet all three constraints — which is why PEEK, PEI, and carbon-fibre composites have replaced metal throughout imaging suites.

Engineering Plastics for Vacuum Systems: Outgassing & Material Selection - cover image

Engineering Plastics for Vacuum Systems: Outgassing & Material Selection

In vacuum, materials lose their usual virtue: the property that matters most is not strength but what they release. Outgassing contaminates optical surfaces, ruins thin films, and lengthens pump-down times. Choosing plastics for vacuum service means balancing low outgassing against mechanical needs, radiation exposure, and bake-out temperatures — and knowing which popular materials to avoid.

Injection Moulding vs CNC Machining: Choosing the Right Process for Plastic Parts - cover image

Injection Moulding vs CNC Machining: Choosing the Right Process for Plastic Parts

The most expensive mistake in plastic part development is choosing the wrong manufacturing process. Machine a part that should have been moulded and you pay tooling prices per piece; tool up for a part that should have been machined and you wait weeks and gamble on design changes. This guide lays out the decision factors honestly, including the break-even logic most suppliers avoid discussing.

滚动至顶部

Inquiry form