News Centre
News Type
Send your inquiry
Plastics for Pharmaceutical Manufacturing: GMP Cleanroom Material Guide
Material Options for GMP Equipment
Application | Material | Why |
Filling & capping components | PEEK, PPSU | Steam sterilisable, low extractables, wear resistant |
Tablet press tooling & guides | PEEK, PET-P | FDA compliant, wear resistant, no lubrication |
Conveyor guides & star wheels | POM-C, PET-P (FDA) | Low friction, cleanable, colour coded |
Isolator & cleanroom components | PVDF, PP, PEEK | Chemical resistance to VHP and IPA |
Seals & diaphragms | PTFE, filled PTFE | Chemical inertness, no extractables |
Sight glasses & sensor bodies | PPSU, PC (coated) | Transparency plus sterilisation resistance |
The Three Requirements Behind Every Specification
· Cleanability — smooth surfaces, no crevices, and geometry that CIP and SIP can actually reach
· Material compliance — FDA, USP Class VI, and EU 10/2011 documentation for every product-contact part
· Sterilisation compatibility — validated for the actual cycle, whether steam, VHP, or gamma
Why Plastics Beat Stainless in Many Positions
Stainless steel remains the default for product-contact surfaces, and rightly so. But plastics win in specific roles: they run without lubricant, so no grease film can migrate into product; they are lighter and quieter on high-speed lines; and they do not gall or cold-weld against stainless mating surfaces. They are also easier to colour code for line clearance and forgery prevention. The trade-off is that plastics cannot be validated in the same way as metal — a stainless grade is a known quantity, while a polymer grade is a formulation, and formulation changes must be managed through change control.
Change Control: The Part Everyone Forgets
Regulatory exposure usually comes not from the original material choice but from an unannounced change. A supplier reformulates a grade, changes a pigment, or shifts production to a different plant, and the validation file is silently invalidated. Ask suppliers for notification agreements, keep formulation records, and re-validate any component whose material or supplier changes. NAGOMER supports pharmaceutical customers with batch traceability, material certification, and stable grade sourcing so that the documentation in the technical file stays true over the life of the product.
Practical Design Points
· Avoid internal threads and blind holes that cannot be cleaned or inspected
· Prefer large radii and continuous surfaces over joints and crevices
· Eliminate liquid-trapping ledges above the product path
· Specify surface finish targets for critical contact surfaces
· Document the cleaning regime alongside the material selection
Related reading: Plastics for Medical Sterilisation, PPSU & PSU Sulfone Polymers, and Engineering Plastics for Food & Beverage Processing.
FAQ
Q1: What documentation is needed for pharma-grade plastics?
Typically FDA food-contact compliance, USP Class VI where applicable, EU 10/2011 statements, batch traceability, and change notification agreements from the supplier.
Q2: Can plastics be used in aseptic filling?
Yes — PEEK, PPSU, and PTFE components are common in filling and capping equipment where they must survive repeated SIP cycles without releasing extractables.
Q3: Why are plastic parts preferred in cleanrooms?
They run without lubrication, generate low particulate, and can be colour coded. PEEK and PPSU are the standard materials for critical positions.
Q4: How does VHP affect plastics?
Vapour-phase hydrogen peroxide is an oxidising agent. PEEK, PPSU, and PVDF resist it well; polyamide and POM degrade over repeated exposure.
Q5: What is the biggest compliance risk with plastic components?
Undocumented material changes by a supplier, which invalidate existing validation without any visible difference in the part.
Specifying components for GMP equipment? Contact NAGOMER for compliant stock shapes and machined parts with full traceability and documentation.
────────────────────────────────────────
NAGOMER — Professional Engineering Plastics Solutions
www.nagomer.com | info@nagomer.com