News Centre
News Type
Send your inquiry
Plastics for Rail & Mass Transit: EN 45545 Fire Safety Compliance
How EN 45545 Works
· Hazard levels HL1 to HL3 — HL3 is the most demanding, applied to tunnels and underground systems
· Requirement sets R1 to R26 — each product category has its own set of tests
· Three core tests: flame spread, smoke density, and smoke toxicity
· Operating categories determine the applicable hazard level for a given vehicle
· Products must meet all three criteria simultaneously — passing one is not enough
Crucially, EN 45545 is not a single material property but a system requirement. A material that self-extinguishes beautifully can still fail the toxicity criterion, and a low-smoke material may fail flame spread at the required thickness.
Material Options for Rail Interiors
Component | Typical Material | Key Requirement |
Interior panels & cladding | Phenolic composites, PEI | Flame spread, smoke density |
Handrails & grab poles | PA, POM (FR grades) | Wear, grip, toxicity |
Seat components & brackets | PA66-GF FR, PPS | Structural plus fire performance |
Cable ducts & conduit | PA, PC/ABS FR, PPS | Ignitability, smoke |
Insulators & electrical parts | PEEK, PPS, PEI | Inherent V-0, low toxicity |
Wear strips & guides | POM, UHMW-PE | Durability (lower fire exposure) |
Why Inherently Flame-Retardant Materials Help
Halogen-free flame retardant additive packages are essential for many polymers to meet EN 45545, but additives bring their own problems: reduced impact strength, processing sensitivity, and in some cases higher smoke output than expected. Materials that are inherently flame retardant — PEEK, PPS, and PEI — avoid much of this compromise, because the flame resistance comes from the polymer backbone rather than an additive. They typically combine low smoke density with low toxicity, which is exactly the combination EN 45545 rewards. The trade-off is cost, and for large interior panels composites or FR polyamides remain more economical.
Practical Compliance Notes
· Certify at the thickness and colour actually used — many ratings are thickness specific
· Re-test after any formulation change, including pigment and additive changes
· Keep material certificates in the technical file for each component
· For non-European projects, check local equivalents such as NFPA 130 in North America
· Remember that adhesives, coatings, and labels are also part of the fire load
Choosing a Supplier for Rail Projects
Rail programmes run for decades, and material availability over that horizon matters as much as the test certificate. Ask suppliers for consistent batch traceability, stable formulations, and willingness to provide test specimens from production stock rather than laboratory samples. NAGOMER works with rail and transit customers on component-level material selection and supplies machined parts with the documentation their validation teams require.
Related reading: Flame Retardant Engineering Plastics & UL94, PPS GF40 Sheet Guide, and Engineering Plastics in Aerospace.
FAQ
Q1: What is EN 45545 HL3?
Hazard Level 3 is the most stringent level of the rail fire safety standard, applied to vehicles operating in tunnels or underground where evacuation is difficult.
Q2: Is UL94 V-0 enough for rail interiors?
No. EN 45545 additionally requires smoke density and smoke toxicity performance. A material can be UL94 V-0 and still fail EN 45545.
Q3: Which plastics meet EN 45545 most easily?
Inherently flame-retardant polymers such as PEI, PPS, and PEEK typically combine low flame spread with low smoke and toxicity, though specific grades and thicknesses must be tested.
Q4: Can standard POM be used in train interiors?
Generally only for low-exposure applications, and often not at HL3. POM is difficult to flame retard, so PPS or FR polyamide grades are usually specified instead.
Q5: What is NFPA 130?
The North American equivalent framework for fixed guideway transit fire safety, applied to subways and light rail systems in the United States.
Working on a rail or transit project? Contact NAGOMER for fire-safety material guidance and machined components with documentation for your technical file.
────────────────────────────────────────
NAGOMER — Professional Engineering Plastics Solutions
www.nagomer.com | info@nagomer.com